Jim & Milo
On our first, long distance, camping trip up in Washington State, Milo was hot and miserable from lack of airflow to the back of the E. It was over 90 degrees and the A/C was not keeping up. Hell hath no fury like a hot Alaskan Malamute who can’t get a cool breeze in his face in 90 degree heat. It was a miserable trip with an incredibly vocal and displeased Malamute.
So once home I set out to find a replacement for that third door window. To my surprise there were no alternatives. Being a dedicated dog owner and problem solver, I set out to design a window that would be super easy to pop out, super fast to re-install, and easy to use for increased airflow. It needed to match the look as well as have a way to lock, and store away.
After some trial and error, I finalized the design of the window. Each Dog E Window is hand crafted from 3/16 Polycarbonate. I found it doesn’t really create much more wind noise, as I have tested it on i-90, over the Columbia River Bridge (on a windy day… is there any other? ), and down country roads. Even with Milo sticking his giant head out, additional wind noise is minimal. Most importantly Milo was super happy and having him ride along was fun again. Now, even when camping, the increased airflow is 100% better on hot days.
Each window is available in passenger side or driver’s side, or as a set. They work with or without rain guards and on any Honda Element.
After crafting each window for the client I place it on my Element to be 100% sure of fit and workmanship. I include a storage bag, with every order. Each window has 5, keyed, locks and extra keys, and pop rivets to pop back into the holes left behind from the window lever. In addition, all windows come in Dark Smoke Tint to match the dark tint of the back window of the E.
I have made install videos on You Tube as well.
*You can follow Milo and his MiloRider on Instagram @MiloandMcfly to see all his adventures with the Honda Dog E Window.
❄️📦 ZeroBreeze Mark 2 Adapter Kit (Dual · 4″)
Dual-hose adapter kit for ZeroBreeze Mark 2 portable AC units
This adapter kit is designed for ZeroBreeze Mark 2 dual-hose systems used with the Trail Breeze™ / eleVENT™ Modular Window Vent System.
Both intake and exhaust hoses on the Mark 2 use the same diameter, making this a simple, symmetrical dual-opening setup.
What This Kit Does
- Uses both vent openings for intake and exhaust
- Supports standard ZeroBreeze Mark 2 hose sizing
- Provides a clean, sealed window interface
- Eliminates cracked windows or temporary panels
What’s Included
- 4″ clamp adapter ×2
(Trail Breeze window system sold separately. Hose clamps not included.)
Compatibility
- ZeroBreeze Mark 2
- Trail Breeze™ / eleVENT™ Modular Window Vent System
Notes
- Both hoses use the same 4″ diameter
- Confirm dual-hose configuration before ordering
Expansion
Already have a Trail Breeze window?
This kit can be added anytime under Accessories & Expansion → Adapter Kits.
❄️📦 ZeroBreeze Mark 3 Adapter Kit (4″ + 5.5″)
Complete adapter kit for ZeroBreeze Mark 3 dual-hose systems
This adapter kit is designed specifically for ZeroBreeze Mark 3 portable air conditioners when used with the Trail Breeze™ / eleVENT™ Modular Window Vent System.
The Mark 3 uses two different hose sizes, and this kit provides the correct adapters for both intake and exhaust through the system’s dual-opening window design.
What This Kit Does
- Supports the ZeroBreeze Mark 3 dual-hose configuration
- Routes intake and exhaust through a single Trail Breeze window
- Eliminates temporary or improvised window seals
- Provides a purpose-built, secure interface
What’s Included
- 4″ clamp adapter ×1
- 5.5″ clamp adapter ×1
(Trail Breeze window system sold separately. Hose clamps not included.)
Compatibility
- ZeroBreeze Mark 3
- Trail Breeze™ / eleVENT™ Modular Window Vent System
Notes
- Hose sizes differ between intake and exhaust on the Mark 3
- Verify hose orientation before installation
Expansion
Already have a Trail Breeze window?
This kit can be added anytime under Accessories & Expansion → Adapter Kits.
🔥❄️📦 EcoFlow Wave 2 / Wave 3 Dual-Hose Adapter Kit
Complete dual-hose adapter kit for EcoFlow Wave 2 and Wave 3 portable AC units
This adapter kit is designed specifically for use with the Trail Breeze™ / eleVENT™ Modular Window Vent System and EcoFlow Wave 2 or Wave 3 portable air conditioners.
It provides a clean, secure way to route both intake and exhaust hoses through a single Trail Breeze window using the system’s dual-opening design.
What This Kit Does
- Allows one vent opening for intake and one for exhaust
- Supports interior or exterior unit placement
- Uses EcoFlow quick-connect (QC) hose interfaces
- Eliminates improvised hose routing or cracked windows
Hose direction depends on whether the AC unit is placed inside or outside the vehicle.
What’s Included
- 5″ EcoFlow QC adapter ×1
- 6″ EcoFlow QC adapter ×1
(Window vent system sold separately.)
Compatibility
- EcoFlow Wave 2
- EcoFlow Wave 3
- Trail Breeze™ / eleVENT™ window systems
Notes
- EcoFlow QC adapters are designed for quick-connect couplers, not clamp-only retention
- Clamp hardware is not included