Jim & Milo
On our first, long distance, camping trip up in Washington State, Milo was hot and miserable from lack of airflow to the back of the E. It was over 90 degrees and the A/C was not keeping up. Hell hath no fury like a hot Alaskan Malamute who can’t get a cool breeze in his face in 90 degree heat. It was a miserable trip with an incredibly vocal and displeased Malamute.
So once home I set out to find a replacement for that third door window. To my surprise there were no alternatives. Being a dedicated dog owner and problem solver, I set out to design a window that would be super easy to pop out, super fast to re-install, and easy to use for increased airflow. It needed to match the look as well as have a way to lock, and store away.
After some trial and error, I finalized the design of the window. Each Dog E Window is hand crafted from 3/16 Polycarbonate. I found it doesn’t really create much more wind noise, as I have tested it on i-90, over the Columbia River Bridge (on a windy day… is there any other? ), and down country roads. Even with Milo sticking his giant head out, additional wind noise is minimal. Most importantly Milo was super happy and having him ride along was fun again. Now, even when camping, the increased airflow is 100% better on hot days.
Each window is available in passenger side or driver’s side, or as a set. They work with or without rain guards and on any Honda Element.
After crafting each window for the client I place it on my Element to be 100% sure of fit and workmanship. I include a storage bag, with every order. Each window has 5, keyed, locks and extra keys, and pop rivets to pop back into the holes left behind from the window lever. In addition, all windows come in Dark Smoke Tint to match the dark tint of the back window of the E.
I have made install videos on You Tube as well.
*You can follow Milo and his MiloRider on Instagram @MiloandMcfly to see all his adventures with the Honda Dog E Window.
eleVENT™ Heater Port System
Dedicated 75mm Window Pass-Through for Diesel Heater Setups
The eleVENT™ Heater Port System is a vehicle-specific front window insert designed specifically for diesel heater use.
Built around a sealed window plate and a dedicated 75mm (3") pass-through port, this system provides a clean, reliable way to route heated air into your vehicle — without modifying your vehicle or relying on heat-sensitive components.
Installation is simple and fully reversible: roll the front window down, place the window plate into the opening, then raise the window to secure the assembly in place.
Estimated lead time: Approximately 2 weeks
Purpose-Built for Heat
Diesel heaters produce sustained high-temperature airflow that requires a dedicated solution.
Unlike modular vent systems, the eleVENT™ Heater Port System uses a sealed plate with a direct pass-through port, eliminating unnecessary openings and reducing heat loss.
What’s Included
Each Heater Port System includes:
- Vehicle-specific window plate (no vent openings)
- Pre-cut 75mm (3") heater port
- Metal mounting flange
- High-temp gasket
- Mounting hardware (nylon lock nuts included)
How It Works
- Heater duct connects directly to the 75mm port
- The sealed plate helps retain heat inside the vehicle
- The system installs on either the driver or passenger side
- No permanent modifications are required
Installation Notes
The Heater Port Kit is user-installed, allowing you to choose which side of the vehicle to configure.
All required hardware is included, and the flange mounts securely using a multi-bolt pattern for consistent sealing and durability.
Compatibility
- Designed for standard 75mm (3") diesel heater ducting
- Compatible with 60mm systems using commonly available reducers
- Works with most portable diesel heater setups
Important Use & Safety Notes
⚠ Driving Use
Never drive with the system installed.
⚠ Heating Systems
Follow all manufacturer safety guidelines. Ensure proper ventilation at all times.
⚠ General
Designed for compatible vehicle windows only. Do not modify or force-fit components.
